Welded Bar Grating
• The welded bar grating joins bearing bars to cross rods.
• One-piece panels support floors and access routes.
- Product Introduction
The welded bar grating joins parallel bearing bars to cross rods as a single floor panel. Welded intersections keep the members together during transport, lifting and installation. The bearing bars carry the main load between supports; the cross rods maintain their spacing. Open areas permit drainage and leave the underside visible. Carbon steel and stainless steel can be used with the finish specified for the project. Cutting and edge treatment prepare separate platform sections, stair treads or service covers. The bar section, spacing and clear span determine the structural selection, with traffic type considered alongside the required panel outline.
Product Parameters
|
Item |
Project information |
|
Material |
Carbon steel or stainless steel |
|
Joint |
Bearing bars welded to cross rods |
|
Surface |
Untreated, galvanised or project-specified |
|
Size |
Cut to the panel schedule |
Main Applications
The welded bar grating supports equipment platforms and routine maintenance walkways.
Service trenches can use framed panels that lift out for access.
Stair treads and selected trolley routes use a bar layout matched to the traffic.
Separate grating pieces can become a coordinated stair or platform arrangement. Each piece retains its own bearing direction and perimeter, allowing the assembly to follow the support geometry instead of relying on a single large rectangular sheet for every opening.
Why choose us
Our welded bar grating orders follow an identified panel schedule at Hebei Richen. Workshop preparation covers welded assembly, edge treatment and defined opening positions. Drawing review and ordered packing are part of the same fabrication workflow. Buyers can therefore communicate panel changes using the schedule reference that production and receiving teams also use, keeping mixed shapes organized throughout the order.
An opening close to a panel edge deserves its own drawing detail, since the remaining load path and edge support need to be clear.
FAQ
Q: Do cross rods provide the main load-carrying span?
A: No. The bearing bars carry the principal load between supports.
Q: Can several cut-outs share one panel?
A: Yes. The drawing can define their positions and required edge bands.
Q: Can stainless steel be selected?
A: Yes. Carbon and stainless material options are listed for fabrication.
Hot Tags: welded bar grating, China welded bar grating manufacturers, suppliers, factory
